How can I adjust the power of the device using the keypad?
For safety reasons, the device is limited to 30% of the possible output on delivery.
As skin resistance, pain sensation and other individual factors vary from person to person, it is advisable to adjust the output power of the device individually for each programme.
For example, the power should be increased when the message "Connection load" is displayed. How exactly these settings can be made using the device's keypad is explained in the enclosed instructions.
Of course, you also have the option of customising the performance of the respective applications using the software provided.
Important note: The output power of the device can only be adjusted if a frequency programme has been initiated and is active.
Increasing the output power:
Press the UP button
Decrease the output power:
Press the DOWN button
General note:
The selected configuration always refers to the current frequency programme and the currently active frequency.
As a rule, a frequency programme is made up of several frequencies.
Consequently, the defined output power is saved for each of these frequencies.
The next time the programme is run, these settings are retained and do not have to be entered again.
This is due to the fact that each person perceives frequencies and output power differently.
It therefore makes sense to make these settings specifically for each frequency and not in general.
However, if you want to change the output power for one or more programmes at the same time, this is easier to do via the software.